Waldorf Largo - Manual (Page 61)

Sound Parameter
61 Largo User´s Manual
Polarity Pos / Neg
Controls if the signal is fed back normally or inverted.
Feedback 0…127
Feeds the Chorus output signal back to its input.
Flanger
The Flanger effect is very similar to the Chorus effect, but
features feedback circuitry to feed the generated signal
back into the comb filter. This generates a deeper
detuning and colorizes the signal. With extreme settings
you can hear a whistling sound which is very
characteristic of a Flanger effect.
w
A Mix setting of 48 to 96 produces the strongest effect
because both the unaffected signal and the processed
signal are mixed together.
Speed 0…127
Sets the LFO speed of the Flanger effect.
Depth 0…127
Sets the modulation depth of the Flanger effect.
Delay 0…127
Sets the initial delay that is added to the Flanger delay
line.
Feedback 0…127
Controls the feedback amount of the Flanger signal.
Polarity positive / negative
Determines whether the feedback signal is fed back into
the Flanger as is, or is inverted beforehand.
Phaser
A Phaser is a combination of several "allpass" filters
working in parallel. This generates an effect with equally
spaced frequency peaks or troughs. The result is a strongly
colorized signal with a “spacy” character.
w
A Mix setting of 48 to 96 produces the strongest effect
because both the unaffected signal and the processed
signal are mixed together.
Speed 0…127
Sets the LFO speed of the Phaser effect.