Waldorf Largo - Manual (Page 59)

Sound Parameter
59 Largo User´s Manual
w
Please note that Glide function must be set to off
when you want to set Arp Glide for individual pattern
notes. Otherwise, the glide effect will occur on all
notes.
The Effects
The Largo has two similar effect units which are editable
separately for each layer.
FX Active
Switches the corresponding FX unit on or off.
Mix 0…127
The only parameter that is common to all types of effects
is the Mix parameter. This parameter controls the volume
ratio between the original signal and the effect output. If
set to 0, the dry signal is sent to the outputs only so that
no effects can be heard. Higher values will increase the
effect signal. At maximum setting, the pure effect signal
will be heard.