Parameter module section, Common area – Waldorf Largo User Manual
Page 39
Sound Parameter
39
Largo User´s Manual
commonly used setting, which gives a piano-like
character. With negative settings, the volume decreases at
higher velocities. This gives an atypical character suitable
for effect sounds. As the Amplifier always works in
conjunction with the Amplifier Envelope, this parameter
actually determines the envelope velocity amount. The
following picture illustrates this functionality:
Amp Mod Source
see table Modulation Sources
Selects the source of the volume modulation.
Amp Mod Amount
0...127
Determines the amount of volume modulation.
Parameter Module Section
The controls for e.g. envelopes, the modulation matrix
and the three LFOs can be found in the Parameter
Module Section
.
Selection of the Modules
Click on the desired Module to open the corresponding
area.
Common Area
Glide
off / on
Enables or disables the Glide effect. "Glide" or
"Portamento" describes the continuous gliding from one
note to another. This effect can be created on fretless
stringed instruments or some brass instruments (e.g.
trombone). It is very common on synthesizers and used
Time
Output
100%
Maximum Volume
Velocity Parameter = 0
Key Velocity = 1É127
Time
Velocity Parameter = +63
Key Velocity = 127
Key Velocity = 64
Key Velocity = 1
Time
Velocity Parameter = -64
Key Velocity = 1
Key Velocity = 64
Key Velocity = 127
0%