Vortech 2000-2008 Honda S2000 User Manual

Page 38

P/N: 4HS020-010

21OCT08 v4.0 S2000(4HS020-010v4.0)

11. SUPERCHARGER BELT TENSIONER ADjUSTMENT

12. AIR PUMP INLET HOSE MODIFICATION (2000-2005 MODELS ONLY)

Fig. 12-b

Fig. 12-a

A. Make sure that the 1/2-20 jam lock nut previ-

ously threaded onto the tensioner arbor is

threaded down almost all of the way, but not

tight. The belt is tightened/loosened by rotat-

ing the belt tensioner adjustment screw.

Tighten the belt until light resistance is felt in

the belt tensioner adjustment screw. Proper

belt tension is achieved when the belt can be

twisted approximately 1/4 of a turn by hand.

Adjust belt tension as needed. Do not over

tension the belt.

B. From beneath the vehicle, tighten the 1/2-20

jam lock nut on the belt tensioner arbor.

C. Reinstall the factory accessory belt using the

factory routing.

A. Separate the air pump inlet hose from the

factory hose union that was originally con-

nected to the engine inlet duct.

B. Insert the supplied 3/4" air pump inlet hose

filter into the pump inlet hose. (See Figs.

12-a, 12-b.)