Vortech 2000-2008 Honda S2000 - Manual (Page 29)

P/N: 4HS020-010
©2008 Vortech Engineering, LLC
All Rights Reserved, Intl. Copr. Secured
21OCT08 v4.0 S2000(4HS020-010v4.0)
17
8. SUPERCHARGER MOUNTING BRACkET/PLATE INSTALLATION, cont’d.
Fig. 8-m
SUPERCHARGER SUPPORT PLATE
VIEW FROM FRONT (BEFORE
JOINING TO MAIN PLATE
ASSEMBLY)
PRE-INSTALLED 3/8
-24 "PRESS NUT"
INSERT (LOCATED
ON BACKSIDE OF
PLATE)
SUPERCHARGER
SUPPORT PLATE
3/8-16 x 1.25 SCREWS WITH
A WASHERS (DO NOT
TIGHTEN SCREWS UNTIL
ENTIRE BRACKET
ASSEMBY IS MOUNTED
ONTO ENGINE)
HOLE FOR M12 x 1.75 x
50mm SCREW (INSTALLED
FROM BACKSIDE)
SUPERCHARGER PLATE
MOUNTING BLOCK
(SANDWICHED BETWEEN
VTEC SOLENOID AND
CYLINDER HEAD)