Vortech 2000-2003 Ford Focus Zetec/SVT - Manual (Page 32)

P/N: 4FJ020-010
©2004 Vortech Engineering, LLC
All Rights Reserved, Intl. Copr. Secured
19APR04 v3.0 Focus(4FJ v3.0)
20
Fig. 16-e
CUT ENGINE
GROUND FROM
TERMINAL. INSTALL
SUPPLIED RING
TERMINAL AND
GROUND TO
BODY
USE THE SUPPLIED HARDWARE,
RING TERMINALS, SHRINK SLEEVE
AND WIRE TO LENGTHEN THE
POSITIVE LEAD TO THE REMOTE
BATTERY TERMINAL
GROUND TO
FRAME RAIL
WITH VORTECH
SUPPLIED WIRE,
LUG TERMINALS
AND BATTERY
TERMINAL
RUN LEAD TO THE POSITIVE
BATTERY TERMINAL ON
THE RELOCATED BATTERY
BATTERY
- +
FACTORY POSITIVE
TERMINAL MODIFIED
5/16" -18
.75" HXHD
TO ENGINE BLOCK
DISCARD THE
FACTORY
BATTERY
TERMINAL AND
GROUND WIRE
TO BODY
16. BATTERY RELOCATION, cont’d.
KEEP THE BATTERY BOX LEVEL
AS THE FRAME RAIL RISES. THIS
WILL MAKE A GAP BETWEEN THIS
CORNER OF THE BATTERY BOX AND
TOP OF THE FRAME RAIL
THERE SHOULD BE LIGHT CONTACT
BETWEEN THIS CORNER AND THE
INSIDE OF THE SPLASH GUARD.
(THE BOX IS PLACED THIS FAR BACK
IN ORDER TO LEAVE CLEARANCE
BETWEEN THE FOG LIGHTS MARKER
LIGHTS AND THE BATTERY)
THIS LOCATION WILL
MOUNT AT THE VERY
BOTTOM OF THE
FRAME RAIL
FRONT OF CAR
MEASURE FROM
BACK SIDE OF
FRONT BUMPER
MOUNT TOP OF
BATTERY BOX
FLUSH WITH TOP
OF FRAME RAIL
3.60"
Fig. 16-f