Vortech 2000-2003 Ford Focus Zetec/SVT User Manual

Page 26

P/N: 4FJ020-010
©2004 Vortech Engineering, LLC
All Rights Reserved, Intl. Copr. Secured
19APR04 v3.0 Focus(4FJ v3.0)

11.

STANDARD DISCHARGE INSTALLATION, cont’d

(H.O. Charge-cooled applications skip

to Section 12.)

Fig. 11-d

5/32” HOSE

SUPERCHARGER

DISCHARGE TUBE

BYPASS VALVE

AIR INLET

DUCT

12.

CHARGE COOLED DISCHARGE INSTALLATION

Fig. 12-a / ZX3 Model

90° ELBOW

Install on the supercharger discharge the
Ø2.75" to 2.5" reducer sleeve.

Install the supplied 90° sleeve on the throttle
body.
• ZX3 Models: Ø3.25" to 2.75" reducer x 90°
• SVT Models: Ø2.75" x 90° sleeve.

Install the welded charge-cooler into the
Ø2.75" end of the reducer sleeve on the dis-
charge of the supercharger.
ZX3 Models: Install the Ø2.75" x 2.0" sleeve

on the discharge side of the charge cool-
er. Install the supplied discharge tube
between the charge cooler and the 90°
sleeve on the throttle body. Secure the
discharge tube with #44 hose clamps.
(See Fig. 12-a.)

SVT Models: Connect the discharge of the

charge cooler to the throttle body with
the installed 90° elbow and #44 hose
clamps. (See Fig. 12-b.) Insert the sup-
plied rubber grommet and IAT sensor
into the discharge tube. Lubricate for
easier fit if needed. Connect the recently
installed IAT sensor harness to the IAT
sensor in the discharge tube.