Vortech 2000-2003 Ford Focus Zetec/SVT User Manual

Page 17

P/N: 4FJ020-010

19APR04 v3.0 Focus(4FJ v3.0)

Install the compression fitting with the

3/8"NPT female outlet on the shortest section

of power steering line containing the fitting

that connects to the power steering pump.

(ZX3 Models: see Fig. 6-d, SVT Models: see

Fig. 6-g.)

Install the compression fitting with the

1/4"NPT female outlet on the longer section

of power steering hose. (Both models see

Fig. 6-c.)

Install the 3/8"NPT x -6 x 45° fitting into the

3/8"NPT female outlet installed on the short

section of power steering line. Take this

assembly and install it into the bottom of the

power steering pump with the 45° fitting

pointing toward the front of the car. (ZX3

Models see Fig. 6-e, SVT Models see Fig.

6-h.)

Install the 1/4 NPT x -6 fitting into the 1/4

NPT female outlet installed on the long sec-

tion of the power steering line. Reinstall the

stock section of the power steering line back

into the steering rack. Route the open end of

the hose, in its stock location orienting it

toward the front of the car.

POWER STEERING LINE MODIFICATION, cont’d

Fig. 6-d / ZX3 Models Only

Fig. 6-e / ZX3 Models Only

Fig. 6-c

COMPRESSION FITTING

COMPRESSION

FITTING

STOCK P/S PUMP

FITTING REMOVED

IN FIG. 6-b

3/8NPT X -6

x 45° FITTING

1/4"NPT x -6 FITTING

COMING FROM P/S RACK SIDE

FITTING ASSEMBLY

DIRECTLY OFF THE

POWER STEERING PUMP

SECURED P/S HOSE

Fig. 6-f / SVT Models Only

CUT

Fig. 6-g / SVT Models Only

CUT SECTION w/FITTINGS

INSTALLED

STOCK, UNCUT P/S HOSE