Vortech 2000-2003 Ford Focus Zetec/SVT - Manual (Page 24)

P/N: 4FJ020-010
©2004 Vortech Engineering, LLC
All Rights Reserved, Intl. Copr. Secured
19APR04 v3.0 Focus(4FJ v3.0)
12
10. SVT DSI BOX RELOCATION
A. Locate the DSI Box in the driver’s side fender
well. Disconnect the electrical connector from
the box. Disconnect the cable from the base
of the throttle body. (See Figs. 10-a, 10-b.)
B. Remove the hardware securing the DSI box
bracket from the frame rail. Remove the box
from the bracket.
C. Using two of the original battery tray hold
down screws, secure the supplied DSI box
relocation bracket to the top of the driver’s
side frame rail (See Fig. 10-c.).
D. Secure the DSI box to the relocation bracket
using the supplied 1/4-20 hardware. (See Fig.
10-d.)
E. Reconnect the electrical connector to the DSI
box. Route the cable back to the base of the
throttle body and reconnect. (Ensure that the
cable has no kinks and has free movement.)
Fig. 10-a / SVT Model Only
Fig. 10-b / SVT Model Only
Fig. 10-c / SVT Model Only
Fig. 10-d / SVT Model Only
UNSNAP LINE
BRACKET INSTALLED
DSI BOX INSTALLED