Dell 2161DS - Manual (Page 54)

54 Analog Port Operation
w
w
w
.d
el
l.
c
o
m
|
s
upp
ort
.del
l.
com
Figure 3-35. Scan Dialog Box
3
The dialog box contains a listing of all the servers attached to your unit. Click to enable the
check box next to the servers you wish to scan.
-or-
Double-click on a server's name or port.
-or-
Press + the number of the server you wish to scan. You can select up to 16 servers.
4
In the Scan Time box, type the number of seconds (from 3 to 99) of desired time before the
scan moves to the next server in the sequence.
5
Click OK.
To remove a server from the Scan list:
1
In the Scan dialog box, click to disable the check box next to a server to be removed.
-or-
Double-click on a server's name or port.
-or-
Click the Clear button to remove all servers from the Scan list
2
Click OK.
To start the scan mode:
1
Press . The Main dialog box will appear.
2
Click Commands. The Command dialog box appears.