Velodyne SC-IWBB - Manual (Page 9)

www.velodyne.com SC-IW Installation Manual - 3
The SC-Iw comes in two completely separate cartons — the SC-IwBB (Back Box) and the SC-IwdVR (driver).
Parts included with the SC-IwBB rough install kit:
• In-wall back box - Qty 1
• Mudring for “retro fit” installation - Qty 1
• Installation manual - Qty 1
• Installation hardware
Parts included with the SC-IwdVR driver module:
• SC-IW driver module - Qty 1
• Clamp ring - Qty 2
• Standard grille - Qty 1
• Designer grille - Qty 1
• Hardware
• Installation manual - Qty 1
INSTALLATION OVErVIEW
You must first decide how the SC-IW is to be installed — whether new or retrofit installation, and whether you
are using the standard or designer grille. Remember that in all cases the grille can be painted to match the
room’s décor.
Consider the following information when deciding how the SC-Iw will be installed.
Construction New Retrofit
Standard Grille Benefits:
• Allows pre-installation of the back box
at minimal risk and expense
• Provides easiest servicing for the driver
• No risk to the subwoofer during
drywall/paint/finish processes
See page 4 for a description of this
installation
Benefits:
Provides easiest servicing for the driver
See page 38 for a description of this
installation
designer Grille Benefits:
• Provides the smallest grille available
Considerations:
• Must install both back box and driver
cabinet at frame out stage—higher risk
of theft or damage to the subwoofer
• Difficult to service driver as drywall
must be removed to remove driver
module
See page 15 for a description of this
installation
Benefits:
Provides smallest grille available
See page 25 for a description of this
installation