Velodyne SC-IWBB - Manual (Page 54)

www.velodyne.com 48 -SC-IW Installation Manual
Step 11 - Install Drywall Above Filler Plate
After the filler plate is secured to the driver module, install a replacement piece of drywall above the filler plate
in the opening. This drywall should be securely fastened to the studs using drywall screws.
Figure 48: Drywall Installation
Step 12 - Tape, Mud, Texture and Paint Wall
After the SC--Iw is installed into the wall, the wall should be taped, textured, blended and then painted to match
the existing wall. note the grille can also be painted to match the de´cor.
Note: The paint cover should be remain on the driver until this step is complete.