Velodyne SC-IWBB - Manual (Page 31)

www.velodyne.com SC-IW Installation Manual - 25
rETrO-FIT INSTALLATION WITh dESIGNEr GrILLE
Step 1 - Decide on Subwoofer Orientation and Grille Location
The first decision for a retrofit installation is which way the subwoofer will face (up or down), and therefore where
the designer grille will be located on the wall (near the floor or ceiling). Once the location is decided, locate
the 2x4 studs, spaced 16 inches on center. After the general area of the studs is located, determine the exact
location of the studs as detailed in the picture below. There are many methods to do this. Shown is the use of
a “drywall saw” used horizontally to find the edge of each stud.
Figure 24: Subwoofer Orientation and Grille Location