Ubiquiti Networks UniF AP AC Outdoor - Manual (Page 42)

39
Chapter 9: Access Point Details UniFi ® Controller User Guide
Ubiquiti Networks, Inc.
Wireless Uplinks
When an Access Point is not connected by a wire, the
Wireless Uplinks section lists potential uplink Access Points
that can be selected to establish a wireless connection.
Potential Uplinks
AP Displays the name or MAC address of the potential
Uplink Access Point.
Channel Displays the channel in use for wireless
communication.
Signal Displays the percentage of signal strength.
Actions Click a button to perform the desired action:
• Select Click Select to connect the wireless Access Point
to the wired Access Point.
• Remove Click Remove to remove the wired Access
Point from this list of Potential Uplinks.
Note: An Access Point can only uplink to another
Access Point using the same radio band. For
example, the UAP-Outdoor 5G can only uplink to
another UniFi AP using the 5 GHz radio band.
Access Point - Heartbeat Missed
When a wired Access Point is disconnected from the
router, its state will initially change to Heartbeat Missed,
followed by Isolated, and ending with Disconnected.