Uplink (wire), Downlinks – Ubiquiti Networks UniF AP AC Outdoor User Manual
Page 36
33
Chapter 9: Access Point Details
UniFi
®
Controller User Guide
Ubiquiti Networks, Inc.
Uplink (Wire)
Click Uplink (Wire) to display details about the wired
uplink.
Speed
Displays the connection speed in Mbps.
Duplex
Displays the mode, Full Duplex or Half Duplex.
Down Pkts/Bytes
Displays the amount of data
downloaded as packets and bytes.
Up Pkts/Bytes
Displays the amount of data uploaded as
packets and bytes.
Activity
Displays the level of activity in Bytes per second.
Downlinks
The wireless Access Points currently connected to the
wired Access Point are displayed.
Note:
Downlinks will only be visible under the Details
tab when a wireless Access Point is connected.
AP
Displays the name, alias, or MAC address of the
Downlink Access Point.
Signal
Displays the percentage of signal strength
between the two APs.
Actions
Click a button to perform the desired action:
•
Remove
Remove the wireless Access Point from the
wired Access Point.