Ubiquiti Networks UniF AP AC Outdoor - Manual (Page 40)

37
Chapter 9: Access Point Details UniFi ® Controller User Guide
Ubiquiti Networks, Inc.
WLANs
You can deploy multiple wireless networks organized into
WLAN groups on different Access Points.
WLANs (11n/b/g) or WLANs (11n/a)
WLAN Group Select the appropriate WLAN group from
the drop-down menu.
Name Displays the network name or SSID of the available
wireless network.
Overrides SSID override information applied to the
wireless network.
Actions Click a button to perform the desired action:
• Override Click Override to enable a VLAN (Virtual
Local Area Network), set the VLAN ID, and enter the SSID
override name to apply to the wireless network.
Note: The Override option is not available for a
Zero Handoff WLAN Group.
Override
Enabled Select the checkbox to enable override settings
on the Access Point.
VLAN Select the checkbox to enable the VLAN.
• VLAN ID The VLAN ID is a unique value assigned to
each VLAN on a single device. Enter a value between
2 and 4095. For example, in a large deployment where
there are multiple buildings, you can use a different
VLAN ID for each building while all of the VLANs remain
on the same corporate network.
SSID Enter the SSID override name to apply to the
wireless network.
PSK If the WPA-Personal security option has been applied
to the WLAN under “Settings > Wireless Networks” on
page 8, the Pre-Shared Key (PSK) for the SSID specified
will automatically appear in this field.
Actions Click a button to perform the desired action:
• Apply Click Apply to save changes.
• Restore Click Restore to remove any overrides that
were applied to the selected wireless network.
• Cancel Click Cancel to discard changes.