beautypg.com

Module configuration, Chapter – Spectrum Controls 140 EHC 204 00sc User Manual

Page 22

background image

Counter / Flow Meter Input Module

23

3

Chapter

Module Configuration

This chapter includes information on the following:

Module addressing

Setting up the PLC configuration software (ModSoft, Concept, and SCIOCFG)

Making bit settings for zoom (parameter) registers

Making bit settings for 4X configuration (output) registers

Making bit settings for 3X data and status registers

Some configuration can be performed using the ModSoft, Concept, and SCIOCFG configuration programs.

However, many configuration steps require ladder logic to be prepared for your PLC. For these cases, module

addressing details and bit settings are provided in this chapter, while programming details are included in chapter

4, “Programming.”

This manual is related to the following products: