Spectrum Controls 1769sc-IT6I - Manual (Page 70)

D-4 Compact™ IO Isolated Thermocouple Module
User’s Manual Pub. 0300244-01 Rev. A
At this point you may click “Finish” to complete the configuration of your I/O module.
Configure each I/O module in this manner.
Section D.3
Configuring
I/O Modules
Once you have created a Generic Profile for 1769sc-IT6I Isolated Thermocouple module,
you must enter configuration information into the tag database that is automatically
created from the Generic Profile information you entered. This configuration information
is downloaded to each module at program download, at power up, and when an inhibited
module is uninhibited.
First, enter the Controller Tag database by double-clicking on Controller Tags in the
upper portion of the Controller Organizer.
Based on the Generic Profile created earlier for 1769sc- IT6I module, the Controller Tags
screen looks like the following:
Tag addresses are automatically created for configured I/O modules. All local I/O
addresses are preceded by the word Local. These addresses have the following format:
•
Input Data: Local:s:I
•
Configuration Data: Local:s:C
Where s is the slot number assigned to the I/O modules in the Generic Profiles.
In order to configure an I/O module, you must open up the configuration tag for that
module by clicking on the plus sign to the left of its configuration tag in the Controller
Tag data base.