SpectraCal Panasonic AX900 - Manual (Page 3)

17544 Midvale Avenue N., Suite 100, Shoreline, WA 98133 USA
Corporate: +1 206 420 7514 | Tech Support: +1 206 457 8949 | www.spectracal.com

Picture/Color Balance – Select WARM 1 for color temperature closest to the D65
target.

Picture/Color Gamut – Select ‘sRGB’ for web calibration ‘HD Rec. 709’ for HD
calibration; or for the AX800 and AX900 series, select ‘Adobe RGB’ for digital
photography, or ‘D-Cinema v1.2’ for film emulation.

Picture/Advanced/Gamma – Select 2.4 to test for best performance to selected target.

Picture/Advanced/White Balance – adjust the display’s Gain and Cutoff controls to get
the white balance tracking close to target before adjusting the White Balance multipoint
controls. This can be done manually, or with AutoCal on the “Grayscale – 2 pt” step in
the CalMAN Advanced or ISF Calibration workflow.
CalMAN AutoCal™:

To calibrate grayscale tracking and CMS on these displays, it is best to perform AutoCal
on each of these three CalMAN workflow steps, in this order:
1. Grayscale – 2pt
2. Grayscale/Gamma
3. CMS Calibration

After AutoCal is complete, optimize the display’s Brightness control for the local
viewing conditions.
CalMAN Disconnect Procedure
To disconnect CalMAN from the Panasonic display:

On the CalMAN Display Control tab, click Disconnect.