SpectraCal Fujifilm IS-Mini - Manual (Page 4)

3528 Bagley Ave. N. Seattle, WA 98103 USA
Corporate: +1 206 420 7514 | Tech Support: +1 206 457 8949 | www.spectracal.com
data points). During the load process, CalMAN converts the .3dl file into the file format required by the
IS-mini.
To load a 3D LUT file into an IS-mini:
1. In CalMAN, on the Display Control tab, connect to the IS-mini as a Display Control device.
2. On the Display Control tab, click the ‘Open DDC Window’ button.
3. On the DDC Controls dialog, scroll to the ‘3D LUT Controls’ page.
4. Click the ‘Load LUT File’ button.
5. In the resulting file navigation window, select the .3dl LUT file that has been created for the IS-
mini.
Done: The selected 3D LUT file is now contained in the IS-mini.