SpectraCal Klein K10 Cinema Pro - Manual (Page 3)

17544 Midvale Ave. N. Shoreline, WA 98133 USA
Corporate: +1 206 420 7514 | Tech Support: +1 206 457 8949 | www.spectracal.com
Meter Settings Options
Meter Mode (Target Display Type)
 LCD Direct View
 LCD Direct View (LED Backlight)
 OLED Direct View
 CRT Direct View
 Plasma
 Rear Projector (CRT)
 Rear Projector (UHP)
 Front Projector – facing projector (CRT)
 Front Projector – facing screen (CRT)
 Front Projector – facing projector (UHP)
 Front Projector – facing screen (UHP)
 Front Projector – facing screen (LED)
 Ambient Light
Select the Meter Mode that corresponds to the display you wish to measure or
calibrate.
Sync Mode
 Auto (default)
 Off
Standard Exposure Mode
 1 Sample
 3 Samples (default)
 5 Samples
 10 Samples
 20 Samples
Low Light Handler
Meter Positioning
Flat Panels / Rear Projectors
The K-10CPA ships with a read head boot which can be used to place the K-
10CPA right up against a display screen. The boot is made of soft rubber so that
you need not worry about damaging the surface of the display. Because it
blocks all ambient light, the read head boot makes the K-10CPA ideal for
measuring reflective displays such as plasmas.
Front Projectors