Martin Christ Epsilon 2-4 LSCplus - Manual (Page 92)

Freeze-dryer EPSILON 1-4 LSCplus
Freeze-dryer EPSILON 2-4 LSCplus
8 Maintenance and service
92
Version 04/2014, Rev. 1.4 of 09/12/2014 • sb
Translation of the original operating manual
Pos: 193 /20 0 Ch rist/3 61 G T-BA L abo r-Pilot (PROJEKTE)/Epsilo n 2 -4 LSC plus Sta nda rd/0 80 Wa rtu ng u nd I nsta ndh altun g/08 0-0 010 -00 10- 001 0 Eisko nde nsato rka mme r ( nur E2-4 ) @ 25\ mod _140 498 475 764 0_6 8.doc x @ 1 861 13 @ 4 @ 1
8.1.1.1 Ice condenser chamber
Before each start-up, ensure that the ice condenser chamber is free from
water residues.
• Empty the defrosting water collecting tray and wipt it dry.
• If necessary, wipe the ice condenser chamber dry with a cloth.
Pos: 194 /01 0 Univ ersal mod ule/L eerz eile @ 0\m od_ 120 211 624 450 0_0. docx @ 11 4 @ @ 1
Pos: 195 /20 0 Ch rist/3 61 G T-BA L abo r-Pilot (PROJEKTE)/Epsilo n Sta nda rd/0 80 Wa rtu ng u nd I nstan dhal tung /08 0-0 010 -00 10- 002 1 Son der ausst attu ng: Tüv erschl ussrie gel aus Edels tahl Epsilon @ 25 \mo d_1 404 9846 771 36_ 68.d ocx @ 185 889 @ 4 @ 1
8.1.1.2 Special equipment: Stainless steel door latch at the loading door
Systems that are equipped with a stainless-steel or acrylic glass door with a
stainless-steel door latch have a slide pad on the door latch. This slide pad
is included in the scope of supply as a spare part. It must be inspected
regularly for signs of wear. When its thickness is < 0.5 mm, it must be
replaced.
1
Door latch
2 Slide pad
(part no. 177270)
3 Torx screws
Fig. 77: Door latch and slide pad
Replacing the slide pad:
Unscrew the two screws of the slide pad with a Torx
® TX10 screwdriver,
remove the old slide pad, and install the new one.
Pos: 196 /01 0 Univ ersal mod ule/Seit enwec hsel @ 0\m od_ 120 211 624 4312 _0. docx @ 10 5 @ @ 1