User guide, User manual and installer guide, Remote control – Lumagen VisionPro User Manual

Page 7: Vision pro

Vision Pro

™

User Manual and Installer Guide

Rev 1.13

User Guide

This section describes the user interface for everyday functions. For initial setup
information see the Installer Guide section.

The

VisionPro user commands can be selected with the supplied infrared remote control,

or with the RS232 serial port. Contact the installer for information on user commands if
the RS232 serial port is used.

Remote Control

The infrared remote control is shown below.

Configuration
Memory
Selection

Input Aspect

Ratio Selection

Input

Selection

Power

Image

Zoom

OSD

Input Aspect
Ratio Selection
Step

Input Aspect

Ratio Selection

Step

Activate Menu

Exit/Cancel