Lumagen VisionPro - Manual (Page 4)

Vision Pro
™ User Manual and Installer Guide
© 2003 Lumagen, Inc. 1 Rev 1.13
Introduction
Thank you for purchasing the Lumagen
VisionPro™ Video Processor. It has been
designed to offer great video processing quality, while providing the best available value.
We hope you find that the
VisionPro Video Processor exceeds your expectations.
The two main sections of this manual are the User Guide and the Installer Guide. As
their names imply, the User Guide provides instructions on day-to-day usage, and the
Installer Guide provides initial setup information.
To simplify references to video projectors, direct-view televisions and rear-projection
televisions, they are all referred to as a “display” in this manual.
It is important to read and understand this manual, and the display’s specifications, before
programming the
VisionPro Video Processor. Also, check the www.lumagen.com
website for possible updates.
Features
The Lumagen
VisionPro™ Video Processor provides a cornerstone for the ultimate
home theater experience. It is designed to adapt to your home theater needs, rather than
having the designed-in limitations commonly found in today’s video processors.
Some notable features are listed below.
•
Eight programmable inputs
•
All inputs can be programmed as composite or SVideo. Four inputs can also be
programmed as component. Two inputs can also be programmed as pass-through
•
Studio quality TV decoder with 10-bit A/D converters
•
Adaptive comb-filter reduces cross-luma and cross-chroma artifacts
•
3:2 and 2:2 film pull-down frame-reconstruction
•
Per-pixel motion-adaptive video deinterlacing
•
Black-level, contrast, color, hue and Y/C delay calibration
•
Two independent input/output configuration memories for each input
•
Automatic selection of configuration memory based on input type.
•
Detail enhancing scaler
•
Programmable output resolution from 480p to 1080p, in scanline increments, plus
1080i
•
Programmable output color format and synchronization type
•
Programmable vertical refresh rate
•
Programmable screen aspect ratio
•
Over-sampled 10-bit digital-to-analog converters for the video output
•
Pass-through sync-polarity processing for displays that require a specific sync polarity
•
High-quality video input adaptor cables are provided
•
Back-light infrared remote control with on-screen menu system
•
RS232 serial interface
•
Silent operation (no fan)