Lumagen VisionPro - Manual (Page 12)

Vision Pro
™ User Manual and Installer Guide
© 2003 Lumagen, Inc. 9 Rev 1.13
Rack Mounting
For installation in a 19” rack, remove the two case screws on the left and right sides of
the unit. Place a rack-mount adaptor on each side and loosely replace screws through the
rack-mount adaptors and case cover. Align the rack-mount adaptor front tabs so that their
front edge is flush with the backside of the front panel and so they are vertically aligned
with the front panel. Retighten the screws.
It is suggested that a 1U space be left above and below the
VisionPro for better cooling.