LINK Systems OmniLink - PLC Interface - Manual (Page 42)

June 5, 2000 Man ual Rev 1 .0
5.15
7.3 tons will be sent as 73
12 tons will be sent as 120
Note that this is true even if the tonnage monitor itself does not show a decimal point on its screen.
Section 5.7.41 Parameter 041 - Peak Reverse Tonnage (Channel 2)
Value:
Standard Numeric, 1 decimal place
Meaning:
Same as parameter 40
Section 5.7.42 Parameter 042 - Peak Reverse Tonnage (Channel 3)
Value:
Standard Numeric, 1 decimal place
Meaning:
Same as parameter 40
Section 5.7.43 Parameter 043 - Peak Reverse Tonnage (Channel 4)
Value:
Standard Numeric, 1 decimal place
Meaning:
Same as parameter 40
Section 5.7.44 Parameter 044 - Peak Reverse Tonnage (Total)
Value:
Standard Numeric, 1 decimal place
Meaning:
Same as parameter 40
Section 5.7.45 Parameter 045 - Tonnage Monitor Channel 1 Status
Value:
Standard Numeric
Meaning:
The numeric code for the status of the tonnage monitor channel. Values Are: