Hatteland Display HT C02HI (Compact Entry Level) - Manual (Page 18)

18
IND100210-18
General Installation Recommendations
Installation
Cabinet cover removal
Note: Areas of interest are marked in this section with arrows in RED color. Please disconnect ALL cables from the
computer unit before proceeding!
1: Unscrew 3 screws from top of cabinet.
Use a Pozidriv #2 screwdriver.
2: Unscrew 3 thumb screws in rear of cabinet. Turn anti-
clockwise using your fingers or flat screwdriver (if tight).
3: Push cover gently down while pushing forward approx
10mm [0.39”] away from the front.
4: Lift the cover up with both hands.
Repeat the procedure backwards to attach the cover again.