Hanna Instruments HI 2214 - Manual (Page 3)

3
P R E L I M I N A R Y E X A M I N A T I O N P R E L I M I N A R Y E X A M I N A T I O N P R E L I M I N A R Y E X A M I N A T I O N P R E L I M I N A R Y E X A M I N A T I O N P R E L I M I N A R Y E X A M I N A T I O N
Remove the instrument from the packing material and examine it carefully
to make sure that no damage has occurred during shipping. If there is any
damage, notify your Dealer or the nearest Hanna Customer Service Center.
Each instrument is supplied with:
• HI 1131B Glass-body Combination pH Electrode with 1 m (3.3')
Cable
• HI 7662 Temperature Probe
• HI 76404N Electrode Holder
• pH 4.01 & 7.01 Buffer Solutions (20 mL each)
• HI 7071 Electrolyte Solution
• HI 700661 Electrolyte Solution
• 12VDC Power Adapter
• Instruction Manual
Note: Save all packing material until you are sure that the instrument
functions correctly. All defective items must be returned in the
original packing with the supplied accessories.
The HANNA HI 2214 and HI 2215 are a microprocessor-based pH and
Temperature bench meter.
HI 2215 can also measure Oxidation Reduction Potential (ORP) in mV
range.
Relative mV feature is also provided.
pH measurements are compensated for temperature effect manually or
automatically with the
HI 7662 temperature probe.
Up to a five-point pH calibration can be performed using seven standard
buffers. In addition, two custom buffers can be used during calibration.
The
GLP feature provides data consistency.
A calibration due alarm can be set to alert the user that too much time
elapsed since the last pH calibration.
Data can be stored in the meter’s memory for later retrieval.
The meter’s memory can hold a 100 manual logged points and 500 lot
logging points (
HI 2215 only).
A USB connection ensures communication with a PC.
G E N E R A L D E S C R I P T I O N G E N E R A L D E S C R I P T I O N G E N E R A L D E S C R I P T I O N G E N E R A L D E S C R I P T I O N G E N E R A L D E S C R I P T I O N