beautypg.com

User agreement, Attention, Dear customer – FeiYu Tech FY-41AP User Manual

Page 3

background image

Guilin Feiyu Electronic Technology Co., Ltd

Guilin Feiyu Electronic Technology Co., Ltd http://www.feiyudz.cn [email protected]

- 3 -

Dear Customer :

Thank you for choosing FY-41AP as your autopilot system. Please read this manual

carefully to ensure correct installation & operation.

FY-41AP has both fixed wing and

Multi-rotor versions. You can choose your preferred version while upgrading your firmware.

You are currently reading the Multi-rotors version manual.

User Agreement

The use of FY - 41 AP is prohibited for any illegal intentions and purposes.

The user will be fully responsible for the use of this product and FY-Tech will

not be held liable for it's misuse either in its original or altered state by the

customer (including the direct, indirect, or third party losses caused by a faulty

plane or plane crash).

Please read this manual carefully before using this product. If you have

any questions, do freely contact us and we will attempt to provide you with a

satisfactory clarification and/or resolution sho

uld it be required. The products‘

functions may be changed only by firmware upgrades which are available from

our website from time-to-time. Please do check our website for available

firmware upgrades. The company reserves the right to alter the contents of the

product firmware.

This agreement takes immediate effect upon the purchase of the product.

Attention:

(1) The installation and use of this device require some skill and knowledge in flying

remote controlled aircraft.

(2) If you are a complete beginner & have never flown one before, we do not recommend

you install this device on your own. Please find an experienced RC pilot who may provide

you with the basic knowledge required to use this device successfully.

(3) If you are already an experienced flyer, you will find the FY-41AP installation to be

easy & logical. Follow this manual & you won‘t go wrong.

(4) If you need further technical support, contact us at: [email protected]