EXFO IQS-1700 High Performance Power Meter for IQS-500/600 - Manual (Page 194)

SCPI Command Reference
186 IQS-1700
Product-Specific Commands—Description
:UNIT[1..n]:POWer
Description The parameter corresponds to the power units
for the specified channel.
Syntax :UNIT[1..n]:POWerDB|DBM|W|W/W|W
ATT|WATT/WATT
Parameter(s) Unit:
The program data syntax for the first parameter is
defined as a
element. The allowed
DATA> elements for this parameter are:
DB|DBM|W|W/W|WATT|WATT/WATT.
Set the power unit for the specified channel.
Example(s) UNIT:POW DBM
Notes This command is not executed if a data
acquisition is in progress. In that case, the
"Acquisition in progress" message will be
returned.
See Also UNIT:POWer?