EXFO IQS-1700 High Performance Power Meter for IQS-500/600 - Manual (Page 145)

SCPI Command Reference
High Performance Power Meter 137
Product-Specific Commands—Description
:SENSe[1..n]:AVERage:COUNt
Description Sets the number of measurements used to
calculate the final measurement's average on the
specified channel.
At *RST, this value is 2.
Syntax :SENSe[1..n]:AVERage:COUNt
ount>|MAXimum|MINimum|DEFault
Parameter(s) AverageCount:
The program data syntax for is
defined as a element. The
special forms MINimum,
MAXimum and DEFault are accepted on input.
MINimum allows to set the instrument to the
smallest supported value.
MAXimum allows to set the instrument to the
greatest supported value.
DEFault allows the instrument to select a value
for the parameter.
The represents the number of
measures to average for the final measures.
MIN, MAX and DEF can also be used as
parameters.
Example(s) SENS:AVER:COUN 12
See Also SENSe:AVERage:COUNt?
SENSe:AVERage:STATe
SENSe:AVERage:STATe?