EXFO IQS-1700 High Performance Power Meter for IQS-500/600 - Manual (Page 150)

SCPI Command Reference
142 IQS-1700
Product-Specific Commands—Description
:SENSe[1..n]:CORRection:FACTor
[:MAGNitude]
Description This command sets a correction factor. The units
are w/w by dÈfault.
Syntax :SENSe[1..n]:CORRection:FACTor[:MAGNitude]<
wsp>W/W|DB]>|M
AXimum|MINimum|DEFault
Parameter(s) CorrectionFactor:
The program data syntax for
is defined as a element
followed by an optional
DATA> element. The allowed
PROGRAM DATA> elements are: W/W|DB. The
special forms MINimum,
MAXimum and DEFault are accepted on input.
MINimum allows to set the instrument to the
smallest supported value.
MAXimum allows to set the instrument to the
greatest supported value.
DEFault allows the instrument to select a value
for the parameter.
The parameter is a
correction factor using W/W as units. If an invalid
parameter is entered, the Parameter out of range
message will be returned.