EXFO AXS-200/610 Copper Test Module - Manual (Page 20)

Getting Started with Copper Qualification Tests
14 AXS-200/610
Regional Settings
Standard
The Standard tab allows you to set
unit parameter values for the selected
profile composed of current Distance
Units and Cable Gauge.
³
Standard allows you to specify if
the copper qualification tests
should conform to the ITU
(International
Telecommunications) or ANSI
(American National Standards Institute) standard.
³
Temperature allows you to specify the units of measurement for
temperature in F (Fahrenheit) or C (Celsius).
³
Connection allows you to specify the default type of cable connections
as T-R-G or A-B-E.
To select the parameter values:
1. Press the up/down arrow keys to highlight the desired parameter.
2. Press to display the list.
3. Use the up/down arrow keys to highlight the desired value, and press
to accept the value.