Eurocom P180HM Leopard 2.0 - Manual (Page 29)

System Startup 1 - 5
Quick Start Guide
1
System Startup
1. Remove all packing materials, and place the computer on a stable surface.
2. Securely attach any peripherals you want to use with the notebook (e.g. keyboard and mouse) to their ports.
3. Attach the AC/DC adapter to the DC-In jack at the rear of the computer, then plug the AC power cord into an
outlet, and connect the AC power cord to the AC/DC adapter.
4. Use one hand to raise the lid/LCD to a comfortable viewing angle (it is preferable not to exceed 135 degrees); use
the other hand (as illustrated in Figure 1 - 1 below) to support the base of the computer (Note: Never lift the
computer by the lid/LCD).
5. Raise the lid/LCD to a comfortable viewing angle, and press the power button.
Figure 1 - 1 - Computer with AC/DC Adapter Plugged-In/Opening the Lid/LCD

Shutdown
Note that you should always shut your computer down by choosing the Shut Down command from the Start menu in Win-
dows 7. This will help prevent hard disk or system problems.
135
