Eurocom P180HM Leopard 2.0 - Manual (Page 157)

Modules
Wireless LAN Module 7 - 23
7
Wireless LAN Module
If you have included an Intel® or 3rd Party 802.11b/g/n WLAN module in your
purchase option, make sure that the Wireless LAN module is on before installing the
driver.
Use the Fn + F11 key combination or Touch Sensor Instant Key to toggle
power to the Wireless LAN module. When the WLAN module is powered on, the
LED will be highlighted and the indicator will briefly be displayed.
Make sure you install the drivers in the order indicated in Table 4 - 1, on page 4 - 3 .
The operating system is the default setting for Wireless LAN control in Windows 7.
Note that you need to install both the WLAN & Bluetooth drivers for Intel and 3rd
party WLAN & Bluetooth Combo modules.

Wireless Device
Operation Aboard
Aircraft
The use of any portable
electronic transmission de-
vices aboard aircraft is usu-
ally prohibited. Make sure
the module(s) are OFF if
you are using the computer
aboard aircraft.
Use the Fn + F11 key com-
bination/Touch Sensor Key
to toggle power to the
WLAN module, and check
the LED to see if the mod-
ule is powered on or not
(see
Table 1 - 3, on page 1
- 11 / Table 1 - 2, on page 1
- 9 ).