Eurocom M3 - Manual (Page 146)

Modules
7 - 10 Setting Up SATA RAID or AHCI Mode
7
33. Click Browse and browse to the location you copied the files to on your USB Flash
drive or external USB hard disk (X: denotes your USB Flash drive or external USB
hard disk):
• X:\f6flpy-x86 (for Windows 8 32bit)
• X:\f6flpy-x64 (for Windows 8 64bit)
34. Click Next.
35. Follow the on-screen instructions to install the Windows 8 operating system.
36. Install the Windows drivers from the Device Drivers & Utilities + User’s Manual
disc as per Table 4 - 1, on page 4 - 3 (make sure you install the Intel Rapid
Storage Technology driver - see overleaf).
37. Run the Intel® Rapid Storage Technology application to manage your RAID
volume as instructed in “Intel® Rapid Storage Technology for RAID Systems”
on page 7 - 39 .
IRST Driver Installation
1.
Insert the Device Drivers & Utilities + User’s Manual disc into an attached
DVD drive.
2. Click
Option Drivers (button).
3. Click
4.Install IRST Driver > Yes.
4. Click
Next > Next.
5. Click the tickbox to accept the license and click Next.
6. Click
Next > Next > Next.
7. Click
Finish to restart the computer.
8. See “Intel® Rapid Storage Technology for RAID Systems” on page 7 - 39 .