beautypg.com

Configuration properties, Configuration, Properties – Echelon MPR-50 Multi-Port Router User Manual

Page 36

background image

nvoIvalCrcErr

(Last CRC Errors)

SNVT_lev_cont Percentage of messages with CRC

errors in the last interval. This
variable is alarmed. See the section
Alarms below for details.

nvoIvalMissed

(Last Missed
Packets)

SNVT_lev_cont

Percentage of missed messages in
the last interval. This variable is
alarmed. See the section Alarms
below for details.

TotalPkts

(Total Packets)

SNVT_count_32

Total messages received since last
reset or clearance of statistics.

nvoTotalCRCErr

(Total CRC Errors)

SNVT_count_32

Total number of messages with CRC
errors since last reset or clearance of
statistics.

nvoTotalMissed

(Total Missed
Packets)

SNVT_count_32

Total number of missed messages
since last reset or clearance of
statistics.

nvoMaxBandUtil

(Max Bandwidth
Use)

SNVT_lev_cont

Maximum bandwidth percentage
utilization in any interval since last
reset or clearance of statistics.

nvoMaxPackets

(Max Packets)

SNVT_count_32

Maximum number of messages in any
interval since last reset or clearance
of statistics.

nvoAvgPackets

(Average Packets)

SNVT_count_32

Average number of packets per
interval since last reset or clearance
of statistics.

Configuration Properties

Each of the five Channel Monitor functional blocks implements the following

configuration properties. The alarm configuration properties are described

separately in the next section, Alarms.

Configuration Property

Description

SCPTholdTime

The amount of time (in tenths of seconds) that a
router's Status LED flashes green after detecting
activity on its external channel.

SCPTneuronId

An array that contains the two Neuron IDs of the
router, with the first Neuron ID in the array being on
the internal channel of the MPR-50, and the second
Neuron ID in the array being on the external channel.
This configuration property is useful for network
management tools and plug-ins to be able to
automatically install all of the routers in the MPR-50
by reading this configuration property and then being
able to know which router is connected to which
external channel.

28

MPR-50 Monitor