Echelon MPR-50 Multi-Port Router User Manual

Page 13

Four key hole slots in the rear of the enclosure are provided for wall/panel

mounting the router. The key hole slots on each side of the DIN rail allow

mounting normally or upside-down. The top of the MPR-50 includes two scored

alignment guides for positioning the screws and for aligning the MPR-50 with

the screws during mounting.

Figure 2.2 MPR-50 Multi-Port Router Enclosure (back view)

Key Hole Slots for Mounting

DIN Rail Lock

Use the following steps to mount the router.

1. Insert two 6-32 flat-head screws into the surface upon which the MPR-50 is to be

mounted. Mounting dimensions are shown in the following drawing, in millimeters.

3. Be sure the heads of screws are protruding slightly from the mounting surface.

4. Slide the MPR-50 onto the screws. It may be necessary to adjust the screws into or

out of the wall slightly to assure a secure mounting.

MPR-50 Multi-Port Router User's Guide