Echelon IP-852 Channel - Manual (Page 17)

IP-852 Channel User’s Guide 9
Figure 2.4 IP-852 Configuration Server Device Properties: Address Tab
11. Enter the IP address of the IP-852 device and click Apply. This is the same address
that you assigned to the IP-852 device using the setup Web pages.
If you use a host name, it must be registered in a DNS server that is available to the
IP-852 Configuration Server computer.
12. Click the SNTP tab, and then select the Use Channel Default check box.
13. Click the Protocol tab, and then select the Use Channel Default check box.
Figure 2.5 IP-852 Configuration Server Device Properties: SNTP and Protocol Tabs