Echelon IzoT Resource Editos - Manual (Page 50)

42 Creating and Modifying Resources
2. Select the new configuration property to set options for it. The Properties (rightmost)
pane appears as follows:
3. Enter the following information:
Name The name of the configuration property member
within the functional profile. This name may
contain only letters, numerals, and the underscore
character, and it must not start with a digit. A
prefix is not required, but “nci” and “cp” are
commonly used. If you do not use this prefix,
start the configuration property name with an
initial capital and use mixed case for the name.
Member A member number of the configuration property
within the functional profile. Each configuration
property must have a unique member number.
Member numbers may start with a “#” or “|”
character. The “#” prefix identifies members
within a user functional profile. The “|” prefix