Echelon IzoT Resource Editos - Manual (Page 30)

22 Creating and Modifying a Resource File Set
 If you are using a standard functional profile
other than functional profiles 0 through 6 and
the functional profile is included in the
standard resource file set, click the arrow and
select the functional profile name. The device
class will be set to the functional profile
number for the selected functional profile.
 If you are using a standard functional profile
other than functional profiles 0 through 7 that
has not yet been included in the standard
resource file set, click the arrow and select
, and then enter
the functional profile number in the two boxes
to the right of Device Class. Enter the last
two decimal digits in the second box, and the
remaining decimal digits in the first box.
 If your primary functional profile is based on
standard functional profiles 1 through 7 (you
cannot use functional profiles 0 or 6 as the
primary functional profile) or a user functional
profile, click the arrow to select from a list of
device classes maintained by the L
ON M ARK
association. You can update the list by
downloading the latest program ID data from
www.lonmark.org/spid. To enter a device
class value that has not yet been added to the
standard list, select Number[Decimal]> and enter a decimal
value from 0 to 255 in each of the fields to the
right of the Device Class field (the calculator
converts the values to hex for the program ID).
Usage The intended usage of the device. The most
significant two bits are determined by the Has
Changeable Interface and Use Field Values
Defined By Functional Profile checkboxes
below the Usage box. If you are using a standard
usage value, set Defined By Functional
Profile, and then click the arrow to select from a
list of standard usage values maintained by the
L
ON M ARK association. You can update the list by
downloading the latest program ID data from
www.lonmark.org/spid . If the primary functional
profile implemented by your device specifies
custom usage values, clear Usage Field Values
Defined By Functional Profile, select Number[Decimal]> in the Usage list, and then
enter a decimal value from 0–255 in the field next
to the Usage list (the calculator translates the
value to hex for the program ID).
Channel Type The channel type supported by the device’s
L
ON W ORKS transceiver. Click the arrow to select