Specifications – Eagle Tree Pro, Glide, Flight and Boat Seagull Wireless Telemetry and Data Recorder User Manual
Page 28

Copyright © 2003-2010 Eagle Tree Systems, LLC
Page 28
Specifications
Recorder
Airspeed: around 2 MPH minimum (Pro and Glide) or 9 MPH minimum (Flight and Boat), approximately 290 MPH
maximum
Altitude (not Boat): 0 to approximately 32000 feet, in approximately 1 foot increments (Pro and Glide) or 8 foot
increments (Flight)
Operational Voltage: 4.35V to 7.0V (1 Watt Transmitter requires 5V to 5.75V, 2.4GHz transmitter requires 4.35 to 6.1V)
Weight: Recorder and Pitot tube, approximately 1 oz.
Temperature: Dual inputs, 0 degrees F to 424 degrees F
RPM range: approx 100 RPM to 50,000+ RPM
Units supported: English and Metric
Measurements: 1.97” x 1.38” x 0.67”
Record Time: Varies with sample rate, parameters being recorded, and “activeness” of the session. Anywhere from
around 20 minutes to hours is attainable depending on these settings. The Pro Recorder has 4x the logging time of the
other Recorders. Virtually unlimited record time is available with PC live mode recording.
Pitot Tube
Weight 3 grams (0.1 oz), length 80mm (3.2”), diameter 4 mm (0.16”)
FCC 900 MHz, 200mW Transmitter
Operational Voltage:
4.35V to 7.0V
Frequency Range:
902 – 928 MHz
Operating Range (Line of Sight):
up to 1.2 miles w/included antenna, up to 3.6 miles with RX Yagi
FCC Approval:
15.247 Frequency Hopping Spread Spectrum
Maximum Output Power:
approx 200 mWatt
Dimensions:
approx 2-3/4” x 1-1/4” x ¼”
Weight:
approx 0.5 oz (Transmitter only)
Temperature Range:
0 – 140 degrees F
TX Antenna:
Thin, flexible stainless whip
Power:
Power taken from Recorder/Receiver battery
Current Draw:
Transmitter + Recorder, average < 70 milliamp
FCC 900 MHz, 1 Watt Transmitter
Operational Voltage:
5V to 5.75V
Frequency Range:
902 – 928 MHz
Operating Range (Line of Sight):
Up to 14 miles (22 km) w/ included antenna, up to 40 miles with RX
Yagi
FCC Approval:
15.247 Frequency Hopping Spread Spectrum
Maximum Output Power:
approx 1 Watt
Dimensions:
approx 1.44” x 2.38” x 0.20” (3.65 cm x 6.05 cm x 0.51 cm)
Weight:
approx 0.8 oz (Transmitter only)
Temperature Range:
0 – 140 degrees F
TX Antenna:
Articulating Rubber Antenna with MMCX Pigtail
Power:
Power taken from Recorder/Receiver battery
Current Draw:
Transmitter + Recorder, average 250 milliamp
FCC/CE 2.4GHz, 100mW Transmitter
Operational Voltage:
4.35V to 6.1V
Frequency Range:
2.4GHz
Operating Range (Line of Sight):
Up to 2 miles (3 km) w/ included antenna
FCC Approval:
Direct Sequence Spread Spectrum
EU Approval:
ETSI, CE
Maximum Output Power:
approx 100 mW