Dreamup - software upgrade – Dream Property DM7000 User Manual
Page 52
- 52 -
43.
DreamUp - Software upgrade
!!!! Very important, please read this passage completely, before starting upgrading !!!!
Dreamup and the Images (Software) for the DM7000S are available at our Website
Remove all cables from the Dreambox.
Connect only the serial and the Patchcable.
The Mainspowercord is disconnected.
You need a Windows PC with a serial port (COM1 or COM2) and an Ethernet card. Connect the
Ethernet card with the Dreambox Communication port using a Crossover Patchcable. Connect the
serial ports with a serial nullmodem cable.
How to figure out the IP-Address in Windows (W98,W2K,XP) :
Click Start -> Run -> type in “Command” -> press Return.
A Dosbox opens. Type at the Dosprompt “ipconfig /all” and press Return. The IP-Address will be
listed. If you have more than one Ethernet adapter listed, then take the first adapter. If you don’t see
an IP-Address, maybe you have no Ethernet card installed or configured. Refer to Windows Help or
consult a Technician for assistance.
Note the IP-Address and Subnetmask.