Hard disk setup, Recording a movie (spontaneous recording) – Dream Property DM7000 User Manual
Page 47

- 47 -
37. Hard
Disk
Setup
Press the DREAM-Button to enter the OSD-Mainmenu. 
Go to (6) Setup -> (3) System Settings -> (3) Harddisc Setup -> select the Harddisc. 
This Menu shows the major Information about the 
installed Harddisc. 
Before formating the Harddisc, please select from 
the right arrow dropdown menu a filesystem which 
the Harddisc will be formated with. Choose an “ext3” 
or “reiserfs” filesystem pressing the OK-Button. 
The “ext3” is a faster filesystem. 
The “reiserfs” is a saver filesystem. 
Press the red Option-Button to format.
Press the yellow Option-Button to check the 
Filesystem. 
 
Please shutdown the Dreambox after formating.
 
 
 
38.
Recording a movie (spontaneous recording)
Attention:
The Infobar disappears after a couple of 
seconds. Press the OK-Button to bring up the 
Infobar. 
During PVR-Mode the Option-Buttons are 
assigned as follows: 
RADIO-Button: start recording 
TV-Button: stop 
red Option-Button: fast rewind 
green Option-Button: start playback 
yellow Option-Button: pause 
blue Option-Button: fast forward 
Select a Service you want to record from the 
Servicelist. This could be either a TV or Radio 
service. Press the VIDEO-Button to activate the 
PVR-Mode. The Infobar shows the PVR control 
symbols. Press the RADIO-Button to start a 
spontaneous recording. During recording, the 
Infobar displays a little blinking red dot. This means 
that a recording is still in process. 
You can watch another service from the same 
Transponder during record. Press the Navigation-
Button up or down to bring up the Servicelist. All 
possible services will be shown. Select another 
service. The recording proceeds in the background. 
Remember to press the VIDEO-Button to activate 
the PVR-Mode after switching to another service 
during recording. 
You can also watch a recorded service during 
record. Press the Navigation-Button up or down to 
bring up the Servicelist. Press the TEXT-Button to 
show all recorded movies. Select a movie by 
pressing the OK-Button. The recording proceeds in 
the Background. 
Remember allways to activate the PVR-Mode 
before controlling a recording or play of a service by 
pressing the VIDEO-Button. 
Press the TV-Button to stop recording.
 
 
 
 
 
 
 
 
 
 
