Dream Property DM7000 - Manual (Page 13)

- 13 -
11. Dreambox switching on / off
Use the Power-Button to switch the Dreambox on or off. The Dreambox has two different Standby-
Modes. A Standby-Mode and a Deep-Standby-Mode. Unplug the Mains powercord to make the
Dreambox completely powerless.
The Power-Button only works if no OSD-Menu is shown on the TV screen!
Press the Power-Button once to switch the Dreambox into Standby-Mode. The actual Time appears
on the LC-Display.
Press the Power-Button for at least 5 seconds, to shut down the Dreambox into Deep-Standby-Mode,
or choose in the OSD-Mainmenu the option (9) Shutdown. All settings will be saved.
Attention: Timer and Sleeptimer only work in Standby-Mode.
Press the Power-Button for at least 3 seconds. The Shutdown / Standby Menu appears.
Use the Navigation-Buttons up and down to
choose an option. Press the OK-Button to
activate.
shutdown now:
The Dreambox shuts down into Deep-Standby-
Mode. The LC-Display shows no information.
restart:
The Dreambox restarts the Operationsystem.
goto standby:
The Dreambox shuts down into Standby-Mode.
The LC-Display shows the actual Time.
set sleeptimer:
See passage Sleeptimer.
12. Sleeptimer
Press the Power-Button for at least 3 seconds, select “set sleeptimer” to enter this menu.
Define a max. duration of 240 minutes. Define if
the Dreambox should shutdown or should go
into standby by setting a check into one of the
checkboxes beside shutdown and standby with
the OK-Button.
Press the green Option-Button to set
Sleeptimer.