Dream Property DM7000 - Manual (Page 22)

- 22 -
22. Automatic Multisat Scan
Press the DREAM-Button to enter the OSD-Mainmenu.
Go to (6) Setup -> (2) Service Searching -> (6) Automatic Multi Scan.
The Automatic Multisat Scan is recommened for
scanning all configured satellites at once.
By pressing the OK-Button on each satellite a
couple of times, you set the scan method.
First: nothing, satellite will not be scanned
Second: all, services will be scanned
Third: only free, services will be scanned
Fourth: nothing, again
Press the green Option-Button to start scan.
This window appears after scanning the satellites.
Press the OK-Button and answer no to the next
question.
23. Manual Transponder Scan
Press the DREAM-Button to enter the OSD-Main menu.
Go to (6) Setup -> (2) Service Searching -> (7) Manual Transponder Scan.
The Manual Transponder Scan is recommened for
scanning a specific Transponder that has not been
found during Automatic Transponder Scan. New
services will be added to the Servicelist.
Press the OK-Button on the upper Dropdownlist and
choose the appropiate Satellite, press the OK-
Button again to select.
Type in the correct Transponder Values in its fields.
Press the green Option-Button to start scan.
The scan results will be shown in the next window.