Dream Property DM7000 - Manual (Page 29)

- 29 -
31. A/V Settings
Press the DREAM-Button to enter the OSD-Mainmenu.
Go to (6) Setup -> (3) Sytem Settings -> (2) A/V Settings.
Use ether the Navigation-Buttons left and right or
the OK-Button to change or set the Values.
Color Format:
CVBS(FBAS), RGB (Red, Green, Blue seperated),
SVideo (Color- and Brightnes signal seperated) and
YPbPr (Component signal e.g. for Projectors).
Aspect Ratio:
4:3 letterbox (standard), (16:9 programs will be
displayed on 4:3 TV’s with black beams at top and
bottom)
4:3 panscan (16:9 programs will be zoomed to full
high on 4:3 TV’s, parts of the picture on the left and
right side will cut off)
16:9 (programs transmitted in 16:9 will be displayed
automatically in 16:9, on 4:3 TV’s the picture will be
reduced in height)
always 16:9 (for 16:9 TV’s, on 4:3 TV’s the picture
will be reduced in height)
TV System:
PAL, PAL+PAL60, Multinorm and NTSC
Select the Norm your TV supports.
We suggest to choose Multinorm.
Auto VCR switching:
Activating this function (standard) switches the
Videosignal from the VCR socket to the TV.
Depending on the used VCR, switching takes affect
by turning on the VCR or starting playback.
disable WSS on 4:3:
Set a check into the Checkbox to disable zooming
on some 16:9 TV’s during 4:3 transmissions.
AC3 default output:
If a program is transmitted with an AC3 Audio-Track
(e.g. Dolby Digital), the Dreambox switches
automatically to this Audio-Track. The AC3 Signal
will only be available at the optical socket.
The Dreambox has no built-in Dolby Digital
Decoder, AC3 signals are not available on the
analogue socket, therefore you need an external
Dolby Digital Amplifier to adjust the Volume.
Press the green Option-Button to save.