Dream Property DM7000 - Manual (Page 21)

- 21 -
21. Automatic Transponder Scan
Press the DREAM-Button to enter the OSD-Main menu.
Go to (6) Setup -> (2) Service Searching -> (5) Automatic Transponder Scan.
The Automatic Transponder Scan scans one
satellite after one which is configured.
Select the first satellite to scan and press the OK-
Button.
Now choose to scan only Free services or not by
setting a check or not. If your LNB is not a C-Band
LNB, then let the check in the Checkbox in front of
“no circ polariz.”
Press the green Option-Button to start scan.
This window appears after scanning the satellite.
Press the OK-Button to proceed to the next satellite
scan.