Dream Property DM8000 HD PVR - Manual (Page 65)

-65-
Frequency steps
This type of searching scans the set frequencies step by step in a set increment.
Use the Navigation-Buttons left/right to set the “Used service
scan type” option to “Frequency steps”.
Frequency scan step size (kHz): Use the Numeric-Keypad to set
the step increment.
Press the OK-Button to save your settings.
You will be taken back to the “Choose tuner” menu.
12.2.1 Tuner B setup (DVB-C)
The same setup possibilities apply if you are using a second DVB-C tuner in your Dreambox (see chapter
12.2 DVB-C Tuner configuration).
12.3 DVB-T Tuner configuration
If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD menu. Navigate to
the option “Setup” and press the OK-Button to select.
1. Navigate to the option “Service searching” and press the OK-Button.
• The “Service searching” menu will open up.
2. Navigate to the option “Tuner configuration” and press the OK-Button.
• The “Choose tuner“ menu will open up.
3. Use the Navigation-Buttons up and down to select the DVB-T Tuner and press the OK-Button.
• The “Reception settings” menu will open up.
Choose your region by pressing the Navigation-Buttons left/right .
If you have connected an active antenna and you want to run the
antenna without it’s original power supply set the “Enable 5V for
active antenna” option to “On”.
Press the OK-Button to save your settings.