Dream Property DM8000 HD PVR - Manual (Page 62)

-62-
12.1.5 Stab Positioner using USALS (DVB-S/DVB-S2)
Use this type of configuration if you want to receive many satellites with a Stab positioner from a Single Uni-
versal LNB. The coax cable is directly connected from you Dreambox to the LNB.
Please read the section 12.1 DVB-S/DVB-S2 configuration to learn how to get into this menu.
The “Reception settings” menu will open up.
Use the up/down-Buttons to navigate to the “Mode” option and
use the left/right-Buttons to select “Positioner”.
This menu is meant for a Stab positioner. You only have to enter
the geographical details of your residence.
At http://www.heavens-above.com you can find the coordinates of
your residence.
The rest is done automatically by your Dreambox with build-in US-
ALS .
USALS is a model for calculating the position of all satellites in
orbit with a margin of error less than 0.1 degrees. USALS was
developed by the Stab company.
Everything is done automatically and does not require any technical
know-how.
12.1.6 Stab Positioner without USALS (DVB-S/DVB-S2)
Use this type of configuration if you want to receive many satellites without a Stab positioner from a Single
Universal LNB. The coax cable is directly connected from you Dreambox to the LNB.
Please read the section 12.1 DVB-S/DVB-S2 configuration to learn how to get into this menu.
The “Reception settings” menu will open up.
Using the
Navigations-Buttons left/right to select the “advanced”
configuration.
Navigate to the option “Satellite”. Use to the
Navigation-Buttons
left and right to select the desired satellite and.
Navigate to the option “Satellite” and press the Navigation-Button
right.
Use the up/down-Buttons to navigate to the “Mode” option and use
the left/right-Buttons to select “1.2“.